Phoenix Epoxy Elite
Concrete Floor Leveling in Phoenix, AZ
Concrete floor leveling in Phoenix, AZ: self-leveling compounds for uneven, settled slabs before coating. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Phoenix and nearby communities.
An uneven slab shows up as pooling water, high spots that wear the coating thin, or dips where the flake pattern gathers in a low corner. Phoenix's older housing stock especially tends to have slabs that settled unevenly over decades of heat expansion and contraction.
Phoenix Epoxy Elite levels floors before coating goes down, not after a problem shows up in the finished surface. We survey the slab, pour a self-leveling compound where it's needed, and let it cure fully before any topcoat touches it.
What's included
What's Included with Concrete Floor Leveling
Typically included: elevation survey, surface cleaning, self-leveling compound pour, smoothing, cure inspection. Optional: fiber-reinforced compound for higher-traffic areas, moisture mitigation primer upgrade. Customer prep: clear the space fully, flag any known low spots or standing-water areas, and plan for the slab to be off-limits during cure.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Concrete Floor Leveling Process Works
Step 1Floor Elevation Survey
A survey identifies low spots and height variations across the slab.
Step 2Surface Cleaning
Dust and debris are removed to allow leveling compound to bond properly.
Step 3Crack Pre-Treatment
Existing cracks are addressed before leveling material is poured.
Step 4Self-Leveling Pour
A self-leveling compound is poured and spread across uneven areas.
Step 5Smoothing & Finishing
The leveling compound is smoothed to achieve a flat, uniform surface.
Step 6Cure Time & Inspection
The leveled floor is left to cure and then inspected for flatness.
Materials
Materials and Methods for Concrete Floor Leveling
Self-Leveling Underlayment
A flowable compound fills low spots and creates a flat substrate, important on older Phoenix slabs that have settled unevenly over time.
Fast-Setting Leveler
A quick-setting formula reduces downtime between leveling and coating, useful when a garage needs to be back in use quickly.
Bonding Primer
A primer improves adhesion between old concrete and new leveling material, especially on decades-old pours with surface contamination.
Fiber-Reinforced Compound
Fiber additives increase strength and reduce cracking in the leveling layer, a benefit on slabs with a history of movement.
Polymer-Modified Mix
A polymer blend improves flexibility and durability of the leveled surface under Phoenix's heat cycling.
Moisture Mitigation Primer
A primer reduces moisture transmission from the slab into new layers, relevant on slabs near grade that pick up ground moisture.
Questions on materials?
Get a Free EstimateWhen to call
When to Call for Concrete Floor Leveling
Noticing uneven spots on your slab? Call (602) 932-1348 or request a free estimate before scheduling your coating job.
- Water pools in one corner of the garage or patio after rain
- A coating wears thin unevenly, faster on high spots than the rest of the floor
- The floor feels noticeably sloped or uneven underfoot
- Flake or color patterns gather unevenly during a prior coating job
- You're planning a new coating and want a flat surface before it goes down
Seeing warning signs?
Get a Free EstimateBefore & after
Before and After Concrete Floor Leveling Results
Before 
After
FAQs
Concrete Floor Leveling FAQs
How do I know if my floor needs leveling before coating?
If you see standing water after rain, uneven wear on an old coating, or a visible slope, leveling before the new coating goes down will give you a better, longer-lasting result.
How much does concrete floor leveling cost in Phoenix?
Cost depends on how uneven the slab is and the square footage involved. Minor leveling costs less than correcting a significantly settled area. We give an exact range after seeing the slab.
Do I need a permit for floor leveling?
Standard leveling before a coating job typically doesn't need a permit. Major structural settling correction might require one, which we'll flag during the site visit.
How long before I can coat a leveled floor?
The leveling compound needs to cure fully before any coating goes on top, usually within a day or two depending on the product and thickness poured.
Can leveling fix a cracked slab too?
Leveling addresses unevenness, but cracks get treated separately first. We handle crack repair as part of the same visit when both issues are present.
Is self-leveling compound a DIY project?
Hand-mixed leveling compound rarely pours flat without the right tools and timing. Getting an even, level pour across a full garage or patio is difficult without experience.
Next step
Get a Concrete Floor Leveling Estimate in Phoenix
Ready to fix an uneven slab before coating? Call (602) 932-1348 or request a free estimate.
---
More services
Other Epoxy Flooring services
Garage Floor Epoxy Coatings
Garage floor epoxy coatings in Phoenix with hot-tire pickup resistance, crack repair, and UV-stable topcoats. Free estimates.
Epoxy Floor Coatings
Epoxy floor coatings for Phoenix garages, patios, and interior slabs with moisture testing and UV-stable topcoats. Free estimates.
Polyaspartic Floor Coatings
Polyaspartic floor coatings in Phoenix, AZ: fast-cure, UV-stable garage finishes built for hot-tire pickup. Free estimates.
Ask about Concrete Floor Leveling
Tell us about the project and how to reach you.